For places such as underground garages and storage rooms where high mechanical loads prevail, concrete floors are most often used, the basis of which is methyl methacryl resins. These floors are applied directly to the asphalt. The main features of such sexes are high wear resistance, resistance to moisture, seamlessness of the surface, multicolor and environmental friendliness. All this can be learned in more detail on
Industrial floors are capable of holding a load weighing up to 15 tons per square meter, drying takes 2 hours, the thickness of the layer is 4-6 mm, the application temperature ranges from -35 to +42 degrees. When you should protect the base well, it is concrete floors that come to the rescue. For warehouses and garages, an acrylic chamber floor with a thickness of 10 to 20 mm is also used. It is applied to concrete, seamless, moisture resistant, eliminated, strokes to mechanical influences and aggressive means. It is very important to remember that the surface is not necessary to process before application. The floor will last up to 30 years.
If you need a good floor in the basement, then be sure to use concrete, the basis of which is polyurethane, methyl methacryl and epoxy resins. Their advantages over others are as follows: smoothness, ease of cleaning, tightness and high environmental friendliness.
Smole data is used for the electrostatic concrete floor. Thickness – from 1, 5 to 2 mm. They are used in computer halls, industry workshops, etc. D.