Now the most popular area is the decoration of the premises with plastic. All because PVC wall panels in Moscow can be quite easy to install. At the same time, the material is high -quality, durable and its price is quite acceptable. If you want to save on repair, then the finish with plastic is what you need. Such material can be used in any room. In other words, there is no place where plastic panels would be forbidden to use. This can be done in the hallway, bathroom and in the kitchen.
Let’s get down to business, get acquainted with the features of the process in order to further exclude further problems. At first, you must decide how much material is needed. The length of plastic sheets from 2, 6 to 3 m, width from 250 to 500 mm. And do not forget, you always need to take with a margin. You still need to purchase profiles for docking (moldings), they are intended for the transition between panels. It is better to purchase a little more (for stock). In the course of work, tools such as level, roulette, screwdriver, knife will be needed. And also, a perforator, a square, a pencil, a hacksaw, scissors.
You can start work right now. First you need to make a frame, and for this you need rails with a thickness of 20 mm. It is not difficult to make a wooden structure under plastic. With the help of plastic dowels and metal screws, attach the rail to the wall vertically. The step should be about half a meter. Reiki are mounted on them horizontally: from above, below and in the middle. They should be located at the same level, and parallel to each other. In this case, you need to use the building level. Make installation of the frame, and then adjust it. Thus, a clear accounting of the features makes it possible to install a qualitative result, as well as reduce costs.