There are several types of masonry of bricks: in the first alarm with trimming, in addition and in the first alarm. The master decides for himself what kind of masonry technology to apply during construction. His choice will depend on the state of brick, the properties of the solution, time of year, weather, as well as on the requirement for the future decoration of the front side of the wall. No matter what type of masonry will be used, the brick needs to be soaked so that it does not absorb water from the solution. And the masonry should be placed evenly, along the entire perimeter of the building, so that the load on the foundation grows evenly.
Parting masonry is the most common. In this embodiment, the solution is laid down in an even layer on the wall, while you need to leave a small bed at the edge of the wall, then to fill the vertical seam.
The masonry is appropriate when the spoon and pumpkin bricks are laid. With this technology of brickwork, a hard solution is used, and the wall is embroidered. The solution is placed with a tent from the wall by 10-15 centimeters to avoid unnecessary thickening.
The masonry is more appropriate when the work goes with a mobile solution with 12 -13 centimeters of the precipitation of the cone, but the seams should not be completely filled.
Cutting masonry technology with trimming is a combination of previously described technologies.